West Lake Hills, TX HVAC Services

Successfully installed a new 3-ton side discharge variable speed heat pump system with matching air handler. The installation included complete system setup with proper refrigerant charging, electrical connections at the outdoor unit's control panel, and verification of all operating parameters using digital manifold gauges. All refrigerant lines were properly connected and tested, with system diagnostics confirming optimal performance levels. The existing filtration system was retained per specifications. The complete installation is backed by a 10-year parts and labor warranty, and financing was arranged through Synchrony Financial.

Responded to no cooling call on 9-year-old residential air conditioning system. Upon arrival, performed diagnostic evaluation of outdoor condensing unit located in side yard landscaped area. Conducted visual inspection of equipment and documented unit condition and installation environment. Assessed system operation and identified root cause of cooling failure. Completed necessary repairs to restore proper cooling function and verified system returned to normal operating parameters.

Responded to service call for tripping breakers and GFCI receptacles that would not reset in a 5-year-old residential property. Upon arrival, located and inspected dual electrical panels in utility area. Opened panel covers and performed comprehensive visual inspection of all circuit breakers, bus bars, and electrical connections. Tested affected GFCI circuits and identified fault conditions preventing proper reset function. Inspected breaker integrity, verified proper seating of all breakers in panel, and checked for signs of overheating or loose connections at terminals. Examined neutral and ground bus bar connections for proper torque and wire integrity. Documented panel conditions with photographs showing breaker arrangement, wiring configuration, and overall system status for customer records.

Completed return visit to resolve ongoing shower repair issue. Performed comprehensive 30-point plumbing inspection to identify root cause of previous repair failure. Inspected and tested water pressure regulation system, including exterior pressure gauge and associated piping connections. Verified proper water flow and pressure at bathroom fixtures, including sink faucet operation. Documented system conditions with photos showing pressure readings and fixture performance to confirm successful resolution of shower malfunction.

Responded to service call for 5-year-old tankless water heater experiencing intermittent shutdown issues. Upon arrival, performed comprehensive diagnostic evaluation of the unit including error code analysis, inspection of digital controller display, verification of gas supply line connections, and assessment of water flow components. Examined venting system for proper operation and clearances. Inspected inlet water filtration system and pressure regulation equipment, noting pressure gauge reading at zero PSI which indicated potential water supply or pressure regulator malfunction. Evaluated all brass and copper plumbing connections, shut-off valves, and compression fittings throughout the system. Identified damaged components in lower cabinet section that required attention. Checked electrical connections and wiring to controller board. Assessed condition of gas flex line and associated safety shut-off valves. Documented system configuration with detailed photography of pressure monit

Responded to guest house shower temperature control issue where water randomly fluctuated between hot and cold. Diagnosed failed thermostatic cartridge in shower valve assembly. Removed tiled wall access panels to expose valve body and disassembled pressure-balancing cartridge system. Extracted defective blue thermostatic cartridge along with worn seals, O-rings, and retaining clip from brass valve housing. Installed new pressure-balancing cartridge assembly with fresh gaskets and seals, reassembled valve components, and tested for proper temperature regulation and consistent water flow.

Responded to service call for guest house mini-split system with inadequate cooling performance. Upon arrival, performed comprehensive diagnostic evaluation of the 7-year-old ductless mini-split system including inspection of the outdoor condensing unit, refrigerant lines, and electrical connections. Visually assessed the outdoor unit positioned on gravel pad adjacent to building exterior, noting weathered housing and accumulated environmental debris on protective grille and coil surfaces. Checked refrigerant line connections, electrical conduit routing, and mounting hardware for proper installation and secure attachment points. Evaluated system operation, airflow patterns, and temperature differential across the evaporator coil. Documented equipment condition through photographic documentation showing outdoor condensing unit placement, associated plumbing infrastructure, and overall installation environment. Provided technical findings and recommended corrective actions to restore opt

# HVAC Drain Line Service Responded to service call for HVAC drain issue at 1992 residential property. Upon inspection, located air handler in attic space and identified drainage system concerns. Drain line showed evidence of debris accumulation and potential blockage affecting proper condensate removal. Cleared obstruction from condensate drain line using appropriate methods. Verified proper drainage flow through primary and secondary drain systems. Inspected drain pan for standing water and confirmed adequate pitch for drainage. Tested system operation to ensure condensate was flowing freely through discharge lines. System returned to normal operation with proper drainage function restored.

Responded to clogged bathroom sink in 1992 home. Upon inspection, found undermount white rectangular basin with bronze pop-up drain assembly and three-handle faucet fixture experiencing drainage issues. Accessed plumbing beneath sink and cleared obstruction from P-trap assembly. Verified proper drainage flow through tailpiece and trap configuration. Tested sink operation and confirmed water drains freely with no backup or slow drainage remaining.

Completed comprehensive electrical maintenance inspection on 200-amp main service panel and Generac automatic transfer switch system. Performed quality verification of recent panel installation including inspection of all circuit breakers, circuit labeling accuracy, grounding system integrity, and whole-home surge protection device functionality. Verified proper operation of Generac ATS integration and exterior disconnect components. All circuits tested and confirmed operational, breaker connections inspected for proper torque and heat signatures, and panel organization documented. System operating within normal parameters with no deficiencies noted.

Responded to service call for HVAC system shutting off due to drain line issue. Upon arrival, performed diagnostic testing on 7-year-old attic-mounted unit using electrical testing equipment to verify system operation and measure voltage readings at 639V. Inspected internal components including dual capacitors, control board, and associated wiring connections. Addressed primary drain line blockage that was triggering safety float switch and causing system shutdown. Cleared obstruction from condensate drain system to restore proper drainage flow. Verified all electrical connections secure and tested system operation through complete cooling cycle to confirm unit running properly without shutoff issues.

Responded to clogged kitchen sink in 1980s residence. Upon arrival, confirmed complete drainage blockage in stainless steel basin. Deployed professional drain cleaning equipment and accessed P-trap assembly beneath cabinet. Cleared obstruction from drain line using mechanical auger, restoring full water flow and proper drainage. Tested system to verify complete resolution and left work area clean.

Conducted comprehensive sales assessment for 4,242 sq ft residential property with four existing 10+ year-old Carrier central HVAC systems, one requiring immediate replacement. Inspected all outdoor condenser units and indoor air handler components, documented equipment specifications, measured existing vent openings and return grilles to ensure proper sizing for replacement options, and prepared equipment replacement proposals featuring Lennox systems comparable to existing Carrier units to match competitive bidding requirements.

Responded to guest bathroom with toilet running continuously and producing loud squeaking noise. Inspected 19-year-old toilet fixture with water supply already shut off at angle stop valve. Diagnosed faulty fill valve assembly causing constant water flow and ballcock mechanism creating squeaking sound. Replaced complete fill valve assembly and flapper to restore proper operation. Tested flush cycle multiple times to verify silent operation and proper shut-off. Addressed bathroom sink issue during same visit, ensuring all fixtures functioning correctly before departure.

Responded to no-water emergency affecting shower and sink in 40-year-old residence. Conducted comprehensive plumbing system diagnostic to identify source of water loss that had persisted for several days. Inspected main water supply line, isolation valves, fixture shutoffs, and distribution piping throughout affected areas. Documented findings and provided detailed summary of system condition and recommended solutions to restore full water service to bathroom fixtures.

Responded to a not keeping up call at a vacant property with two HVAC systems and a mini-split. Performed diagnostic evaluation on system number two, a nine-year-old unit located in the attic. Inspected air handler, condensate drain pan assembly, and associated refrigerant lines. Verified proper installation of drainage system including PVC condensate lines and overflow pan. Checked routing of refrigerant lines and insulation integrity on copper tubing. Documented system configuration and component conditions through photographic records showing furnace/air handler with coiled flexible duct connections, multiple PVC drain lines with proper pitch and connections, and refrigerant line penetrations through attic space. All mechanical components and piping arrangements were accessible for inspection in the attic installation area.

Provided quote for relocation of existing 1.5-year-old Mitsubishi mini-split outdoor condenser unit to accommodate upcoming generator installation and ensure code compliance. Assessed current rooftop installation location, measured required relocation distance, and evaluated line set extension requirements, electrical disconnect repositioning, and refrigerant line modifications needed to safely move unit several feet from its present location. Documented existing equipment condition and installation setup to determine scope of work for relocation project that will maintain system integrity while meeting electrical code clearance requirements for new generator placement.

Responded to service call for reported leak on previously serviced HVAC system at vacant property. Upon arrival, accessed attic-mounted air handler unit and inspected condensate drain system. Identified leak source at primary drain line connection. Cleared condensate drain lines, verified proper drainage flow, and secured all PVC drain connections. Tested system operation to confirm no active leaking and proper condensate removal. All drain lines flowing freely with no backup or overflow conditions observed.

Responded to drain issue on 9-year-old HVAC system in attic location. Upon inspection, identified malfunctioning condensate drain system affecting one of two main systems in 4,760 square foot residence. Cleared primary and secondary drain lines, verified proper drainage flow, and tested drain pan functionality. Inspected thermostat control board (SYSTXZNSMS01 model) and verified proper communication with air handler unit. Examined extensive ductwork installation throughout attic space and confirmed all flexible duct connections remained secure. Cleared debris from attic work area surrounding air handler to ensure proper airflow and system access. System tested successfully with condensate draining properly through primary line, no overflow to secondary pan detected.

Completed dryer vent cleaning service at residential property with significant lint and debris accumulation observed throughout the ductwork system. Removed heavy buildup from the vent line and exhaust termination point to restore proper airflow and reduce fire hazard risk. System now operating with improved ventilation efficiency.

Responded to thermostat displaying wiring error message in 3-year-old residence. Performed comprehensive electrical diagnostic of thermostat wiring and HVAC control circuit. Inspected thermostat connections, verified proper wire terminations at both thermostat location and air handler, and tested voltage levels across all control wires. Confirmed all electrical connections were secure and properly landed. Cleared error code and restored thermostat to normal operation, with unit successfully calling for cooling on Stage 2. Advised that HVAC system evaluation may be warranted if error recurs, as issue could be related to equipment communication rather than electrical wiring fault.

Responded to upstairs bathroom sink stoppage in 3-year-old residence. Successfully cleared drain obstruction in Kohler undermount lavatory basin using mechanical cable auger, restoring proper drainage and flow. Tested fixture operation with widespread faucet assembly to confirm complete clearance and verified no leaks at trap connections upon completion.

Responded to service call for newly installed water heater with no power supply in 1969 residential property. Inspected outdoor service disconnect panel mounted on utility pole and main electrical panel located in enclosed crawlspace area beneath home. Verified existing panel configuration and circuit availability for electric water heater connection. Documented weathered outdoor disconnect showing age-related deterioration and moisture staining at base. Photographed new PRO+40 M2 RHOS electric water heater unit with visible manufacturer specifications indicating 240V electrical requirements. Assessed electrical distribution system capacity and confirmed no amperage delivery to water heater circuit as reported, preventing operation of new appliance installation.

Completed follow-up service to address exposed landscape lighting wiring that remained unburied after previous repair work. Properly buried all low-voltage wiring runs throughout the landscaped areas adjacent to the concrete patio and mulched beds, ensuring code compliance and protection from environmental damage. Inspected and verified all wire connections and splices that were previously accessed during the tree lighting repair, confirming secure terminations and proper waterproofing. Tested system operation to ensure transformer functionality and proper voltage delivery to all fixtures, including the elevated tree lights approximately 20 feet above ground level. All landscape lighting wiring now properly concealed and protected per industry standards.

Responded to a toilet stoppage in a bedroom bathroom. Upon inspection, found the toilet bowl obstructed and filled with excessive amounts of toilet paper causing the blockage. Successfully cleared the stoppage using appropriate drain cleaning equipment and restored proper drainage and flushing function to the fixture.