SALT Service CO., Your HVAC Company in Round Rock, TX

Responded to dual electrical circuit failures affecting AC condenser and kitchen outlets in 1996 residential property. Diagnosed tripped breaker at exterior electrical panel serving condenser unit that would not reset due to fault condition; inspected condenser disconnect, junction box, and associated wiring runs along exterior brick wall. Addressed separate circuit issue affecting non-functioning kitchen outlets on independent branch circuit. Restored power to both affected circuits and verified proper operation of all components.

Completed comprehensive spring maintenance on 11-month-old HVAC system in 2,041 square foot residential property. Performed full system inspection and preventative maintenance service, including air handler and ductwork evaluation. System has been operational since installation and had one warranty service call in October related to heating mode temperature control, which was previously resolved. Accessed interior air handler unit located in hallway closet and conducted thorough visual inspection of all accessible components. Examined ductwork interior conditions and noted moderate dust and particulate accumulation on metal surfaces and damper mechanisms, consistent with normal operation timeframe. Observed three circular ports and damper assemblies at duct terminus showing standard wear patterns for system age. Verified all mechanical components are functioning within manufacturer specifications. Checked airflow through supply registers and confirmed proper damper operation. System

Completed annual plumbing maintenance inspection at a 2,105 square foot residential property. Performed comprehensive evaluation of the gas tank water heater located in the garage, which is now 7+ years old. Inspected pressure relief valve operation, checked for signs of corrosion or leakage around tank base and connections, verified proper venting and combustion air supply, and assessed overall unit condition. Monitored system pressure readings via installed gauge, which showed normal operating parameters. Examined all visible plumbing connections, shut-off valves, and gas line fittings for integrity. Documented current equipment status with photographic records showing pressure gauge readings and general system condition. All components found functioning within normal parameters at time of inspection, with unit showing expected wear consistent with age.

Successfully cleared main line obstruction using professional drain cleaning equipment to restore proper sewage flow throughout the residential plumbing system. Addressed multiple drainage issues including clogged bathroom sinks and main sewer line blockage that was affecting fixtures throughout the 28-year-old home. Inspected toilet tank components and plumbing connections during service call, documenting existing conditions and water supply line configurations for customer reference.

Completed spring maintenance on a 3-year-old Lennox single-stage cooling system serving a 3,749 square foot residence. Inspected outdoor condensing unit, verified proper operation of compressor and condenser fan motor, and checked refrigerant levels. Accessed attic-mounted air handler, inspected blower assembly, verified proper airflow through evaporator coil, and tested condensate drain line functionality. All system components operating within manufacturer specifications with no deficiencies noted at time of service.

Responded to service call for leaking 11-year-old electric tank water heater located in garage. Upon inspection, confirmed active leak from Whirlpool unit with expansion tank and recirculating system installed. Documented current system configuration including breaker location (#13 on main panel) and photographed equipment condition, noting previous replacement performed in 2015. Provided customer with replacement options and quotes for new water heater installation.