Licensed Electrical Services
in Round Rock, TX
When a breaker keeps tripping or a panel runs out of room, Round Rock homeowners need a licensed electrician who explains the problem and names the price first. Our electrical services in Round Rock, TX cover repairs, panel upgrades, Level 2 EV charger installation, lighting, wiring, and troubleshooting, with upfront flat-rate pricing before work begins.
Every job runs under Texas Electrical Contractor License TECL #26149. Not sure we cover your street? Check our Round Rock service area page to confirm local coverage.
TECL #26149, licensed Texas electrical contractor
Founded in 1984, family-owned and operated
Upfront flat-rate pricing
Lifetime guarantee on repairs and installations with SALT+
5,000+ Google reviews
Round Rock Electrical Permits and Licensing in Williamson County
Panel and service upgrades go through the City of Round Rock’s permit and inspection process. That is the City of Round Rock’s process, not Austin’s, so Austin permit steps and fees do not apply to your project. Simple swaps, like a worn outlet or switch, typically do not need one.
We pull the permit as your licensed contractor, coordinate with city inspectors, and hand over closeout documentation. The city lists a $50 residential trade permit fee for standalone work, and you can read the City of Round Rock standalone permit requirements before any work starts.
How the Round Rock Permit Process Works
A panel or service upgrade usually follows this order:
A licensed electrician reviews the home and writes a project scope.
We submit the permit application through the City of Round Rock, including the torque letter the city requires for electrical upgrades and replacements.
We coordinate with Oncor when power must be disconnected and reconnected.
We complete the installation and the city inspects it.
Power is restored after final approval, when applicable.
Electrical work in Texas must meet the state-adopted National Electrical Code, which is the 2026 NEC as of September 1, 2026. Round Rock is primarily Oncor territory, so utility steps run through Oncor. An address outside city limits can fall under a different permit authority, so confirm your jurisdiction by address before planning the work. Homeowners in nearby Taylor deal with a different city permit process, which we cover on our Taylor electrical services page.
Warning Signs You Need an Electrician in Round Rock
A breaker that trips repeatedly is protecting your wiring from overheating. Call a licensed electrician if you notice:
Breakers that trip often or will not reset
Outlets or switch plates that feel warm or look discolored
Lights that flicker when the HVAC system starts
Buzzing behind walls or a tingle from an appliance
A burning smell or visible sparks
Need an emergency electrician in Round Rock? Do not open the panel or handle damaged wiring yourself. If you see sparks or smell burning, leave the circuit off and call (512) 956-7842 to reach our dispatch team.
Common Electrical Issues in Round Rock's 1980s to 2000s Housing Stock
Round Rock grew fast through the 1980s, 1990s, and 2000s, so its homes are newer than Central Austin’s. The defects differ too. Instead of century-old wiring, we mostly find systems sized for yesterday’s loads:
| Electrical Issue | Common Findings in Round Rock Homes |
|---|---|
| Undersized service | A 100-amp to 150-amp panel strains under a second HVAC system, a hot tub, an induction cooktop, or an EV charger. |
| Missing arc-fault protection | Many circuits from this era lack the AFCI protection current code expects. |
| Crowded panels | Circuits added over the years can leave no open breaker spaces. |
| Aging breakers | Worn breakers and loose connections cause repeated tripping and flickering. |
| Aluminum branch wiring | It appears only in a narrow band of homes, so an electrician must confirm what is in your walls. |
Some older homes still have Federal Pacific or Zinsco panels. When we find one, we review its condition, connections, and breakers before planning any work.
Panel Upgrades in Round Rock, TX
A panel upgrade fits when service is undersized, breaker spaces are full, circuits overload repeatedly, or the equipment shows heat damage or age. We review calculated load, panel condition, breaker availability, meter equipment, and grounding before we recommend a scope.
A remodel, a second HVAC unit, a generator, or a water heater replacement changes your home’s electrical demand, so we plan capacity around what you are adding.
Panel work can also involve a permit, an outdoor disconnect, grounding updates, whole-home surge protection, a city inspection, and Oncor coordination. After the review, we explain your options and give an upfront flat-rate price before installation begins.
Request a panel upgrade review online or call (512) 956-7842.
Level 2 EV Charger Installation in Round Rock
Level 2 home charging needs a dedicated 240-volt circuit sized for your vehicle, your charger, and your home’s available capacity. A load calculation comes first, so the new circuit does not overload the panel.
An EV charger does not automatically require a panel upgrade. We check open panel space, service size, charger amperage, parking location, and the wiring route, then decide between a hardwired charger and a receptacle. Many home chargers use a dedicated 40-amp to 60-amp circuit, sized to the manufacturer’s specifications and your load calculation.
Check your utility before counting on a rebate. Round Rock is primarily served by Oncor, not Austin Energy, so most homes here do not qualify for Austin Energy’s home charging rebate.
Schedule an EV charger installation in Round Rock.
Is Whole-Home Surge Protection Required in Round Rock?
Often, yes. Under NEC 230.67, new dwelling-unit services and replacement services need a Type 1 or Type 2 surge protective device at or next to the service equipment. Texas requires electrical work to meet the state-adopted NEC, so a panel replacement here normally includes one. Your permitted scope sets the final requirement.
A panel-level device protects branch circuits and connected equipment from voltage spikes. Plug-in power strips cover only what plugs into them, so they supplement service-level protection rather than replace it.Â
Comparing Round Rock Electrical Contractors
Homeowners often compare us with Mister Sparky, Team Enoch, and local independents. A coupon should not be the only basis for that choice. Compare each provider on:
- Active Texas electrical license status
- A written scope of work
- Who pulls the permit
- Pricing presented before work starts
- Warranty terms and inspection coordination
Other licensed electricians can meet these standards too, so ask every company to answer in writing. We hold TECL #26149, pull the permits ourselves, and price the job before work starts. SALT+ membership adds an annual electrical safety inspection, priority scheduling, and our lifetime guarantee on repairs and installations. See the full range of electrical services we offer across Central Texas.
Round Rock homes deserve electrical work that is permitted, inspected, and priced up front. We pull the permits, explain your options, and stand behind every repair and installation.
Schedule electrical services in Round Rock online or call (512) 956-7842.
Frequently Asked Questions About Electrical Service in Round Rock
Do I need a permit for electrical work in Round Rock?
Panel and service upgrades are permitted through the City of Round Rock, and electrical upgrades and replacements need a torque letter with the application. The city lists a $50 residential trade permit fee for standalone work. Swapping an outlet or switch typically does not need one. We submit the application and coordinate the inspection.
Who licenses electricians in Round Rock and Williamson County?
The State of Texas does, through the Texas Department of Licensing and Regulation, not the city or the county. Contractors need a state license for regulated electrical work. We hold TECL #26149, and you can verify any contractor through the state licensing site before you hire.
How fast can an electrician get to my Round Rock home?
Same-day service is available, depending on call volume, the type of work, and any safety conditions at the property. Tell dispatch about sparks, burning smells, smoke, or water near electrical equipment so they can match the response to the problem. Call (512) 956-7842 to hear the current arrival window.
How much does a panel upgrade cost in Round Rock?
Cost depends on whether the amperage increases, the meter base is replaced, the panel moves to meet working clearances, grounding is updated, wiring defects are corrected, and Oncor must disconnect power. Every home differs, so we inspect your system and give a firm flat-rate price before any work begins.
Why do my breakers keep tripping, and is it dangerous?
A breaker trips on an overload, short circuit, or ground fault to keep wiring from overheating. Resetting it over and over without fixing the cause wears out equipment and raises fire risk. Burning smells, warm wall plates, buzzing, or discoloration make it urgent. Leave the circuit off and call us.
Will I need a panel upgrade for a Level 2 EV charger?
Not automatically. The answer depends on your load calculation, service size, open breaker space, charger amperage, and the condition of the existing panel. We review those details before recommending a dedicated circuit, a panel change, or a service upgrade, so the install fits the capacity your home has.
