Voted Best In Austin
5x Years In A Row!
SAME DAY SERVICE! CALL SALT
When a breaker keeps tripping or a panel runs out of room, Taylor homeowners need a licensed electrician who explains the problem and names the price first. SALT provides electrical services in Taylor, TX for repairs, troubleshooting, panel upgrades, Level 2 EV charger installation, lighting, and wiring, with upfront flat-rate pricing before work begins.
We are a family-owned, multi-trade company serving Central Texas since 1984, and every electrical job runs under Texas Electrical Contractor License TECL #26149.
Our electricians handle the work Taylor homeowners ask about most:
Troubleshooting and repair: Flickering lights, tripped breakers, dead outlets, and unexplained power loss.
Panel upgrades and replacement: Service sized to your home's real electrical load.
Level 2 EV charger installation: A dedicated 240-volt circuit planned from a load calculation.
Whole-home surge protection: Protection at the panel for appliances and electronics.
Wiring and rewiring: Repairs for aging, damaged, or undersized wiring.
Lighting and fixtures: Indoor, outdoor, security, landscape, and recessed lighting, plus outlets, switches, and dimmers.
Safety upgrades: AFCI and GFCI protection, smoke and CO detector wiring, and electrical safety inspections.
Remodel and new construction electrical, plus Generac generator installation.
Browse the full range of electrical services we offer across Central Texas, or tell us what you are seeing and we will point you to the right fix.
A breaker that trips again and again is protecting your wiring from overheating. Call a licensed electrician if you notice:
Breakers that trip often or will not reset
Outlets or switch plates that feel warm or look discolored
Lights that flicker when the AC starts
Buzzing from the panel or behind a wall
A tingle or shock from an appliance
A burning or rubber smell, or visible sparks
Need an emergency electrician in Taylor? Do not open the panel or touch damaged wiring. If it is safe, switch off power to the affected area, stop resetting breakers, and call us. A hot panel, smoke, or sparking needs a call right away.
If you see sparks or smell burning, call (512) 956-7842 to reach our dispatch team.
Panel replacements, service changes, meter base work, new dedicated circuits, EV charger circuits, and major rewiring need an electrical permit and an inspection in Taylor. The City of Taylor handles that process through Development Services, not Austin and not Travis County, so Austin permit steps and fees do not apply to your project. Simple swaps, like a worn outlet or switch, typically do not.
The City of Taylor Building Permits page says permit applications, tracking, and inspection requests all run through the MGO Connect portal. Inspections requested by 3 p.m. are scheduled for the next business day. We submit the permit as your licensed contractor and schedule the inspections.
A panel or service upgrade usually follows this order:
A licensed electrician reviews the home and writes a project scope.
We submit the permit application through the City of Taylor portal.
We coordinate with your electric utility when power must be disconnected and reconnected.
We complete the installation and request the city inspection.
Power is restored after final approval, when applicable.
A property outside Taylor city limits, in unincorporated Williamson County, can fall under a different permit authority, and the work must still meet the state-adopted NEC and be done by a TDLR-licensed electrician. We confirm your jurisdiction by address before planning the work. Our neighbors in Round Rock follow a different city process, which we cover on our Round Rock electrical services page.
Taylor homes fall into three groups: older houses near historic downtown, new neighborhoods growing with the Samsung Taylor fab, and farm or acreage properties outside the denser subdivisions. Each group has its own defects.
| Housing Group or Issue | What We Check in Taylor Homes |
|---|---|
| Historic downtown homes | Older houses can hide cloth-insulated wiring, knob-and-tube remnants, and ungrounded outlets that need a licensed electrician's review. |
| Aluminum branch wiring | Homes built between 1965 and 1973 may have it. We confirm what is in your walls and use CO/ALR rated devices where a listed repair calls for them. |
| Legacy panels | Federal Pacific Stab-Lok and Zinsco panels are not typical in every subdivision, but we review their condition and breakers before planning any work. |
| New-build homes | Added loads from a home office, a bigger HVAC system, workshop tools, or an EV charger can outgrow the original panel. |
| Missing protection | Older circuits often lack AFCI and GFCI protection, which we can retrofit where code calls for it. |
Farm and acreage properties add outbuildings, long feeder runs, subpanels, grounding, and exterior lighting. We inspect the actual installation before recommending a repair, a rewire, or an upgrade, so the work fits your property.
A panel upgrade fits when service is undersized, breaker spaces are full, circuits overload repeatedly, or the equipment shows heat damage or age. Before we recommend a panel upgrade in Taylor, we review calculated load, panel condition, breaker availability, meter equipment, and grounding. That review shows whether your 100-amp service still supports your demand or whether 200-amp capacity makes sense.
Federal Pacific Stab-Lok and Zinsco panels do not always need replacement, but their condition and parts availability affect safety decisions and scope. A remodel, a heat pump, a workshop, or an addition also changes demand, so we plan capacity around what you are adding.
Panel work can include a permit, grounding updates, a city inspection, and utility coordination. Under NEC 230.67, new dwelling services and replacement services need a surge protective device at or next to the service equipment. That rule first appeared in the 2020 NEC, and Texas adopted the 2026 NEC statewide effective September 1, 2026.
Request a panel upgrade review online or call (512) 956-7842.
A Level 2 home charger needs a dedicated 240-volt circuit sized for your vehicle, your charger, and your home’s available capacity. Our electricians run the load calculation first, so the new circuit does not overload your panel. Review our home EV charger installation guide for more on home charging options.
An EV charger does not automatically mean a panel upgrade. We check open panel space, service size, charger amperage, the wiring route, and parking location, then decide between a hardwired charger and a receptacle. A panel at its limit may need load management, a subpanel, or a service upgrade instead.
Current EV charger installation offers are listed on our specials page. Offers change and cannot be combined with other offers, so confirm what applies when you book.
Homeowners often compare us with other local electricians. Price alone should not decide it. A licensed electrician and a handyman differ in ways that matter on panel, service, and EV work:
| Licensed contractor | Handyman or vague quote |
|---|---|
| Works under a contractor license and applicable code requirements | May not provide code accountability |
| Handles permits when the project requires them | Permit responsibility may be unclear |
| Documents findings and presents flat-rate options before work | Scope and pricing can change without a defined diagnosis |
| Plans panels, service equipment, and EV loads from calculated demand | May rely on assumptions or existing breaker space |
Other licensed electricians can meet these standards too, so ask every company to answer in writing. We hold TECL #26149, pull the permits ourselves, and give you a flat-rate price before work starts. We are also one company for your plumbing, generator, and HVAC services in Taylor, so you manage one relationship instead of three.
SALT+ membership adds an annual electrical safety inspection and priority scheduling, and members get our lifetime guarantee on repairs and installations. Current electrical service offers are listed on our specials page and cannot be combined with other offers.
Taylor homes deserve electrical work that is permitted, inspected, and priced up front. We pull the permits, explain your options, and stand behind every repair and installation.
Yes, for panel upgrades, service changes, meter base work, new dedicated circuits, and EV charger circuits. The City of Taylor takes permit applications and inspection requests through its MGO Connect portal. Swapping a worn outlet or switch typically does not need a permit. We submit the application and schedule the inspection for you.
City of Taylor Development Services issues building permits and coordinates inspections for work inside city limits. A property outside city limits can fall under a different authority, so confirm your jurisdiction by address first. We request inspections through the city portal and handle any corrections the inspector lists.
Same-day service is available, depending on call volume, the type of work, and safety conditions at the property. Tell dispatch about sparks, burning smells, smoke, or water near electrical equipment so they can match the response to the problem. Call (512) 956-7842 to hear the current arrival window for Taylor.
Cost depends on the diagnosed scope, access, materials, permit needs, and any panel or utility work involved. We inspect your system, explain your options in plain English, and give a firm flat-rate price before any work begins. You approve the scope and the price first, so the final bill matches what you agreed to.
Crowded breakers, frequent trips, a 100-amp service, or planned additions like a heat pump, workshop, or EV charger are signs to check. Open breaker spaces alone do not prove the service has enough capacity. We run a load calculation, then recommend a repair, a subpanel, or a full panel upgrade based on the numbers.
Not always. A Level 2 charger needs a dedicated 240-volt circuit, and a load calculation shows whether your panel and service can carry it. Some homes need load management, a subpanel, or a service upgrade first. We check capacity before recommending anything, so you pay only for work your home actually needs.
