Trusted HVAC Company in Hutto, TX

Conducted comprehensive HVAC system evaluation in attic-mounted equipment location. Performed temperature diagnostics using digital thermometer, recording supply air temperature of 52.5°F to assess system cooling performance and identify potential hot and cold spot issues throughout the residence. Inspected system monitoring equipment and verified proper sensor installation and wiring connections on structural components. Documented system accessibility, equipment conditions, and operational parameters to determine maintenance requirements and system performance capabilities during peak cooling demand periods.

Conducted comprehensive assessment of existing 400-amp electrical service following whole-home inspection that identified concerns with current panel configuration. Evaluated three breaker boxes located in garage, documenting condition of main breaker assembly, bus bars, and circuit breaker arrangement across multiple distribution points. Photographed deteriorated wiring conditions including dust accumulation on conductors and conduit, improper wire routing, and aging connections at terminal blocks. Assessed compatibility and capacity requirements for 400-amp service replacement to support large residential property with main house and guest house totaling over 7,000 square feet. Provided detailed documentation and recommendations for panel swap to address safety concerns and ensure code compliance for continued reliable electrical service to property with multiple HVAC systems and high electrical demand.

Completed membership maintenance visit on two air conditioning systems as part of SALT PLUS coverage. Performed comprehensive fall maintenance inspection including electrical system evaluation, verified contactor operation and wiring connections, and measured system voltage readings at 101.1V using digital multimeter. All electrical components, terminal connections, and wiring found to be in good condition with no visible signs of wear or deterioration, systems operating within normal parameters.

Responded to no hot water complaint on Rheem tankless water heater with audible beeping alarm. Upon arrival, inspected exterior-mounted unit and found error code 11 displayed on digital control panel indicating ignition failure. Verified gas supply line was open at yellow shutoff valve and confirmed proper electrical connection at junction box. Inspected exhaust vent piping for obstructions and verified clear operation. Due to unit being within manufacturer's 5-year warranty period (installed 2022), advised customer to contact Rheem warranty service for authorized repair or replacement of internal ignition components. Documented error code and unit condition with photographs for warranty claim purposes.

Removed damaged 12" flexible ductwork from attic space by opening sheetrock access panel and replaced with upgraded 14" flex duct to improve airflow capacity to two upstairs bedrooms. Installed support strapping to prevent duct compression and maintain proper airflow. Conducted airflow measurements before and after replacement to document performance improvement. Insulated condensate float switch for proper operation. Protected work areas with drop cloths and performed complete cleanup upon job completion.

Completed spring maintenance on a 3-year-old HVAC system located in attic of a 2,554 square foot residential property. Performed comprehensive inspection of air handler unit, including blower wheel assembly and squirrel cage fan, confirming proper operation and no obstructions. Inspected evaporator coil drain pan, noting minor debris accumulation that was cleared during service. Verified refrigerant line insulation integrity on both supply and return lines. Checked condensate drainage system including primary and secondary PVC drain lines for proper flow and clearance. Inspected flexible ductwork connections and foil-faced insulation for secure attachment and adequate sealing. System operating within normal parameters with no immediate concerns identified. Documented attic installation conditions as clean, safe, and accessible for future service needs.