Trusted HVAC Company in Hutto, TX

Responded to return service call for recurring cooling deficiency on 6-7 year old residential HVAC system in 2,142 square foot home. Upon inspection of interior air handler unit, discovered significant copper refrigerant line corrosion with extensive oxidation, rust-colored discoloration, and patina formation on curved piping sections. Evaporator coil assembly and refrigerant lines showed mottled brown, orange, and greenish surface degradation indicating prolonged moisture exposure and chemical breakdown. Documented advanced corrosion patterns on copper tubing which likely compromised system efficiency and contributed to inadequate cooling performance. Previous service visit one month prior addressed outdoor condenser cleaning, but underlying refrigerant line deterioration was not identified at that time. Current system operating parameters showed thermostat set to 80°F with indoor temperature reading 57°F and estimated recovery time of 2+ hours, indicating severely reduced cooling c

Completed comprehensive electrical maintenance inspection on 3-year-old residential property with single breaker panel located in laundry room. Performed thorough visual assessment of main electrical panel, exterior meter base, disconnect components, and associated conduit runs. Verified proper operation of all circuit breakers, checked for signs of overheating or loose connections, and confirmed adequate grounding and bonding. Inspected exterior electrical equipment including service entrance conductors, weatherhead connections, and PVC/metal conduit installations for proper mounting and weatherproofing. All electrical components found to be functioning within normal parameters with no immediate safety concerns identified during this routine maintenance visit.

Performed routine member maintenance on 2-year-old HVAC system located in attic of 1,543 square foot residence. Accessed attic-mounted air handler and conducted comprehensive system inspection. Verified all electrical connections at control board and terminal strips were secure and properly terminated. Used Fieldpiece SC440 clamp meter with temperature probes to measure amperage draw and verify proper electrical operation of system components. All amp readings were within manufacturer specifications. Proceeded to exterior condenser unit and utilized Fieldpiece SMAN refrigerant manifold and micron gauge to measure system pressures and temperatures. Connected gauge set to service ports and recorded suction and discharge pressures. Verified refrigerant charge levels were appropriate for current operating conditions. Temperature differential across coil indicated proper heat transfer and system efficiency. Condenser coil fins were inspected and found to be in good condition with adequate

Completed fall preventive maintenance on single-zone HVAC system located in attic of 3,130 square foot residence. Performed comprehensive inspection of 5-7 year old unit including visual examination of blower motor assembly (model C-3840UITCFF, 115V, 1.5 FLA), verified proper electrical connections, and confirmed all wire terminations secure. Conducted airflow diagnostics using dual-port manometer to measure static pressures across system, recording readings of 0.23" and 0.21" w.c., which fall within acceptable operating parameters. Inspected flexible ductwork for integrity, noting normal dust accumulation on exterior surfaces with no visible damage or disconnections. Verified insulation placement and condition throughout accessible attic space. Checked damper controls and adjustment mechanisms for proper operation. System demonstrated normal operational characteristics with no deficiencies identified during testing and inspection. All components functioning as designed with no repairs

Installed dedicated electrical circuit to supply power to newly installed Rheem Performance Platinum water heater in interior utility space. Ran appropriate gauge wiring from main electrical panel to water heater location, terminated connections at panel breakers and water heater junction, and verified proper voltage and grounding for safe operation. Work completed to support required inspection of water heater installation in residential property.

Performed scheduled maintenance on a 5-year-old reverse osmosis water filtration system, replacing filter cartridges and verifying proper operation of all quick-connect fittings and supply lines. Inspected associated plumbing connections and documented equipment serial number for service records.