Trusted HVAC Company in Hutto, TX

Responded to service call for tankless water heater and water softener concerns in a one-year-old residence. Upon arrival, performed comprehensive diagnostic inspection of the Rheem tankless water heating system and adjacent water softener unit. Examined all plumbing connections, including hot and cold water supply lines with isolation valves, flexible gas line installation, and PEX piping connections. Verified proper operation of the tankless unit, which displayed normal temperature readings on the digital control panel. Inspected the exhaust venting system and confirmed secure connections at the wall penetration. Evaluated the water softener system for proper functionality, checking control panel settings and regeneration cycle programming. Examined all brass fittings, ball valves with red and blue handles, and black insulated pipe runs for any signs of leakage or improper installation. Confirmed drain pan placement beneath the water heater system for code compliance and leak protect

Installed new 3 ton 14 SEER2 two-stage heat pump system including outdoor condenser unit and indoor air handler. All equipment backed by 10-year parts warranty and 5-year labor warranty. Removed portable unit from property and completed full HVAC installation checklist verifying mechanical connections, electrical safety, and proper system operation.

Performed load calculation assessment for residential property using Wright Soft RMC software. Documented existing two-story structure totaling 2,442 square feet with first floor at 1,025 square feet and second floor at 1,419 square feet. Captured system design specifications and building dimensions to prepare comprehensive HVAC replacement proposal.

Responded to no cooling complaint on 1-year-old Carrier air handler system in 14-year-old residence. Upon arrival, verified unit was running but not producing cool air. Performed system diagnostics including visual inspection of air handler installation in utility closet and electrical panel assessment. Inspected refrigerant line connections, ductwork connections, and electrical wiring configuration. Checked circuit breaker panel for proper power supply and circuit assignments to HVAC equipment. Documented equipment condition and installation setup with photographs showing air handler mounting, refrigerant line routing, and electrical connections for warranty and service records.

Responded to service call for residential air conditioning system not cooling adequately. Upon arrival after 5PM as requested, inspected 5-year-old outdoor condensing unit and found heavily soiled condenser coil with significant dirt, dust, and debris accumulation restricting airflow through the fins. Performed thorough condenser coil cleaning using appropriate cleaning solution to remove buildup and restore proper heat transfer efficiency. Unit operational following cleaning with improved airflow through coil surfaces.

Responded to no cooling complaint on 6-year-old Carrier system. Upon arrival, found customer had recently installed new compactor which was unrelated to HVAC issue. Inspected horizontal air handler unit located in attic space and confirmed system was running but not providing adequate cooling. Thermostat displayed 87°F with system calling for cooling. Verified airflow from supply registers was weak and temperature differential was insufficient. Checked condensate drain lines and verified proper drainage through white PVC piping. Inspected all electrical connections, gas line connections, and ductwork for any obvious defects or disconnections. System components appeared properly installed with no visible damage to equipment or ductwork. Recommended further diagnostic testing of outdoor condensing unit and refrigerant charge to identify root cause of cooling deficiency.