Trusted HVAC Company in Hutto, TX

Responded to service call for non-functioning recessed lighting in kitchen and bathroom areas of 25-year-old residence. Upon arrival, confirmed kitchen recessed LED fixture remained inoperative despite bulb replacement. Inspected ceiling-mounted electrical box and identified wiring connection issues at fixture junction. Removed existing fixture to access electrical box, exposing yellow Romex cable with proper cable clamp connection to metallic outlet box. Verified circuit integrity and power supply to affected areas. Addressed similar lighting concerns in guest bathroom area. Restored proper electrical connections, secured all junction box mounting points, and verified all recessed lighting fixtures operational upon completion.

Responded to service call for 8-year-old HVAC system with drain pan full of water. Inspected condensate drainage system and found blockage preventing proper water evacuation from the drain pan. Cleared obstruction from condensate drain line and verified proper drainage flow. Examined PVC condensate piping, drain pan, and associated components for damage or deterioration. Checked refrigerant lines and insulation for integrity. Tested system operation to confirm condensate is draining properly and drain pan is no longer retaining water. System returned to normal operation with proper condensate removal functioning as designed.

Installed ceiling fan with integrated light fixture in upstairs living area, mounting unit to ceiling junction box and connecting to existing electrical circuit with three-gang switch control for fan speed and lighting operation. Added general-purpose duplex outlet in closet area under stairs by tapping into existing outlet circuit on adjacent wall, running wire through wall cavity and installing new outlet box. Assessed exterior outlet with broken cord remnant lodged in receptacle from previous homeowner; removed debris and evaluated receptacle for potential replacement to ensure safe outdoor electrical access.

Responded to reported circuit issues in laundry room where washing machine was causing multiple breakers to trip intermittently. Performed comprehensive electrical inspection of main service panel and laundry room circuits in 4-year-old residential property. Conducted voltage testing, load analysis, and visual inspection of breaker connections and wiring terminations. Documented panel configuration and circuit directory for reference, noting previous breaker replacement completed during prior service visit for HVAC condenser circuit. Evaluated electrical system integrity and identified potential wiring concerns requiring further diagnostic testing to isolate root cause of nuisance tripping.

Responded to no cooling complaint at 26-year-old residence with single HVAC system located in closet. Replaced thermostat batteries and installed new air filter. Performed comprehensive system diagnostics using SALT Energy Efficiency inspection protocol, including condenser evaluation with manifold gauge readings, superheat measurements, and compressor assessment. Inspected evaporator coil for proper level and drainage components including float switch and auxiliary drain. Evaluated furnace/air handler operation, verifying blower performance and safety controls. Measured supply air temperature at ductwork, recording 82.9°F reading. Assessed flexible duct insulation integrity and overall indoor air quality components. Completed full system checklist covering refrigerant circuit, airflow components, and ductwork condition to identify cooling deficiency cause.

Conducted sales consultation for HVAC system replacement at residential property with 1,699 square feet of conditioned space. Performed load calculations using Wright Soft software to determine proper equipment sizing requirements for the home. Documented existing exterior HVAC equipment location adjacent to brick foundation wall and assessed installation area accessibility for future system replacement.