Trusted HVAC Company in Hutto, TX

Completed installation of mounting wedge for doorbell camera on exterior brick surface to ensure proper viewing angle and optimal camera positioning. Verified secure attachment of wedge beneath existing doorbell unit and confirmed camera functionality and field of view after adjustment. Device is now properly angled for enhanced motion detection and visitor identification.

Responded to multiple indoor lighting failures affecting hallway, closet, and under-cabinet fixtures in a 12-year-old residential property. Diagnosed and resolved intermittent operation issues including non-functional closet light, partially operational hallway lighting, and under-cabinet fixtures causing circuit trips. Inspected electrical panel, tested affected circuits, and restored full functionality to all lighting fixtures.

Responded to airflow issues on a 3-year-old HVAC system located in the attic of an 11-year-old home. Upon inspection, discovered significant dust and debris accumulation within the ductwork and air handler cabinet. The interior duct surfaces showed heavy particulate buildup and deteriorated insulation material, restricting proper airflow throughout the system. Documented conditions with photographic evidence showing contaminated ductwork interior and air handler unit. Recommended comprehensive duct cleaning and system evaluation to restore proper airflow and improve indoor air quality.

Completed full system replacement with installation of 3-ton, 14 SEER2 York two-stage heat pump and matching air handler in interior utility closet. Installed new supply plenum and IAQ 1000 air quality system. Preserved existing UV bulb per homeowner request. All refrigerant lines, electrical connections, and condensate drainage properly configured and tested. Unit positioned in compact closet space with proper clearances maintained. System startup performed with verification of proper airflow, refrigerant charge, and two-stage operation. Existing ductwork reported to be in satisfactory condition from previous replacement. All equipment operational and left in heating mode.

Installed ceiling fan in location with no existing power or ceiling fan box. Ran new electrical circuit from main panel to fan location, installed appropriate ceiling fan-rated junction box with structural bracing to support fan weight at 8.5-foot ceiling height, and installed new wall switch for fan control. Verified all connections at panel, confirmed proper circuit protection, and tested fan operation for functionality.

Responded to no cooling complaint on single-zone HVAC system located in interior closet of 1,598 square foot residential property built in 1981. Upon arrival, performed comprehensive diagnostic evaluation of system with unknown age and maintenance history. Conducted visual inspection of air handling unit, revealing evaporator coil with significant cabinet deterioration, extensive paint chipping, and surface degradation on interior panels indicating advanced age and lack of recent maintenance. Performed electrical diagnostics using clamp meter multimeter on outdoor condensing unit, measuring current draw and verifying compressor operation. Readings indicated abnormal amperage values requiring further investigation of system performance. Inspected electrical connections, control wiring, and component functionality at condensing unit. Evaluated refrigerant circuit operation and airflow characteristics through evaporator coil assembly. System exhibited clear signs of aging infrastructure