Trusted HVAC Company in Hutto, TX

Completed spring member maintenance on both the central HVAC system and mini-split unit in preparation for the cooling season. Performed comprehensive inspections of both 4-year-old systems including checking refrigerant levels, testing electrical connections at the disconnect box, verifying proper operation of the ICM defrost control module on the outdoor condensing unit, inspecting all wiring and terminals, and evaluating overall system performance. Both systems were found to be operating within normal parameters with no deficiencies noted. All electrical connections were secure and showed no signs of corrosion or deterioration, and the defrost control board displayed proper LED indication confirming normal operation.

Completed warranty replacement of motorized dampers on 4-ton heat pump system in 2,653 square foot residence. Original dampers were improperly sized during initial system installation, causing airflow imbalance issues identified during previous warranty visit. Accessed attic-mounted air handler and zone control system, removed existing motorized dampers from supply ductwork, and installed correctly-sized replacement dampers. Verified proper electrical connections to HZ322 zone control panel and confirmed all wiring terminations were secure. Tested damper operation through zone control system to ensure motorized actuators functioned correctly in both open and closed positions. Verified airflow balance throughout all zones and confirmed system operation met manufacturer specifications. System now operating as designed with proper airflow distribution to all zones.

Completed duct sealing work on a 4-year-old HVAC system located in closet of a 29-year-old residential property. Addressed previously identified air leaks on both sides of the plenum using professional-grade silver tape and mastic sealant to restore system integrity and improve airflow efficiency. All seams and connections were properly sealed to prevent conditioned air loss and ensure optimal system performance.

Returned to site to complete HVAC ductwork installation in attic space. Verified proper routing and connection of flexible metallic ductwork, confirmed insulation placement around duct runs, and ensured all mechanical components are properly secured and functional per original installation specifications.

Installed additional ceiling light fixture in kitchen of 3-year-old residence with 9-foot ceilings. Verified existing power supply at electrical panel and confirmed circuit capacity for new lighting load. Ran electrical wiring from existing power source to new fixture location, maintaining proper wire gauge and code compliance. Mounted junction box in ceiling, secured light fixture, and connected all wiring with appropriate wire nuts and grounding. Installed new switch in double-gang box to control added lighting independently. Tested all connections for proper operation and verified both switches function correctly. All work completed to local electrical code standards with no issues encountered during installation.

Performed preventative maintenance on residential HVAC system, focusing on condensate drain line servicing. Cleared and treated drain line to prevent future clogs, inspected internal components including refrigerant lines and coil assembly, and verified proper drainage function to ensure system reliability.