Trusted HVAC Company in Hutto, TX

Completed comprehensive plumbing maintenance inspection on 21-year-old residential property with 2,652 square feet. Inspected single 6-year-old electric tank water heater located in utility room, confirming proper operation and condition. Performed detailed toilet inspection including removal of tank lid to assess internal flush valve assembly, flapper valve, fill valve mechanism, and flush handle operation. Verified all toilet components functioning properly with no leaks detected at supply line connections or tank-to-bowl seal. All plumbing fixtures found to be in good working condition with no immediate repairs required.

Completed spring maintenance on a 4-year-old HVAC system located in interior closet. Performed comprehensive system inspection including amperage draw testing, which measured 0.64 amps on outdoor unit. Inspected plenum area and ductwork, with special attention to previously identified air leaks on both sides of plenum from prior fall maintenance visit. Verified system operation, checked all electrical connections, and confirmed unit is running within normal parameters with no issues reported.

Responded to service call for two malfunctioning exterior hose bibbs located at patio and garage areas exhibiting erratic spray patterns and complete water flow interruption when pressure adjusted. Diagnosed faulty internal components including worn valve washers and compromised vacuum breakers causing inconsistent water delivery. Replaced defective washers and vacuum breaker assemblies on both hose bibb units, tested for proper operation and pressure regulation, and verified leak-free connections with full water flow control restored at both locations.

Completed pressure reducing valve replacement at residential property. Excavated lawn area to access underground PRV assembly, removed failed existing valve and associated components, and installed new brass PRV with green handle control mechanism. Verified proper installation depth, tested valve operation and downstream pressure regulation, backfilled excavation, and restored lawn area. System tested and operating within normal parameters.

Responded to no cooling complaint on 10-year-old Amana closet-mounted HVAC system. Upon arrival, confirmed system was running but indoor blower motor was not operating, resulting in no air circulation and inadequate cooling. Performed diagnostic evaluation and found blower motor had failed. Accessed air handler compartment, disconnected failed blower motor assembly, and installed replacement motor with proper electrical connections. Verified all wire terminations, tested capacitor functionality, and confirmed proper amperage draw. Cycled system through multiple operating modes to ensure blower engaged correctly in both heating and cooling cycles. Restored full airflow and cooling capacity to the residence. Noted previous documentation of microbial growth on supply plenum from recent maintenance visit; recommended follow-up for duct assessment and potential remediation to prevent future air quality concerns.

Conducted comprehensive electrical assessment at 20-year-old residential property to evaluate feasibility of installing dedicated circuit for mini-split system in garage and potential service upgrade to 400-amp capacity. Performed thorough inspection of existing electrical panel, documented current breaker configuration and circuit loading, and assessed available capacity for additional circuits. Evaluated exterior-mounted electrical service equipment including meter base, disconnect boxes, and conduit system to determine infrastructure requirements for service upgrade. Completed load calculation analysis to determine electrical demand requirements for proposed mini-split installation and overall system capacity needs in relation to solar power integration. Photographically documented existing panel interior showing current breaker arrangement, wire management, and available spaces for future circuit additions. Provided technical consultation regarding service upgrade options, dedicate