Trusted HVAC Company in Hutto, TX

Completed comprehensive plumbing maintenance inspection on 3-year-old residential system including gas tank water heater located in garage. Performed standard preventative maintenance checks on all accessible plumbing components, verified proper operation of thermal expansion tanks previously installed, and inspected underground PRV and shutoff valve access points at meter location. All systems found operating within normal parameters with no immediate concerns identified.

Returned to complete outdoor unit repairs on HVAC system. Accessed electrical compartment and performed necessary repairs to capacitors, contactors, and associated wiring connections. Verified proper amperage draw of 67.1 amps using clamp meter to confirm system operating within manufacturer specifications after repairs were completed.

Completed spring maintenance on 4-year-old HVAC system located in attic of 3,000 square foot residence. Identified microbial growth present in supply plenum and noted dirty return air filter requiring attention. Inspected evaporator coil, refrigerant lines, and electrical connections—all components found in satisfactory operating condition with normal wear patterns for system age. Documented moisture staining on air handler base indicating previous condensation issues that may have contributed to biological growth in ductwork. Recommended professional duct cleaning and remediation of microbial contamination in supply plenum, along with investigation of moisture source to prevent recurrence. System currently operating within normal parameters with no immediate mechanical concerns identified during routine maintenance inspection.

Completed comprehensive HVAC member maintenance on 4-year-old system located at side of home. Performed full system inspection including condenser unit exterior examination, verified proper levelness of outdoor unit using precision level tool, confirmed adequate airflow through louver vents with no obstructions or damage present. Inspected electrical panel and verified proper circuit breaker configuration, including 60-amp, 45-amp, and 30-amp GFCI breakers with correct labeling for AC system and associated circuits. Conducted courtesy inspection of electric water heater circuit following previous disconnect replacement to ensure stable electrical connection and proper amperage load. All system components operating within normal parameters with no immediate service needs identified.

Completed comprehensive plumbing maintenance inspection on 1,618 square foot residential property with 15-year-old infrastructure. Performed full system evaluation including single electric tank-style water heater located in garage, confirmed unit age at 7+ years and operating within normal parameters. Conducted water quality testing using chlorine-bromine and pH test kit, documented readings for system health baseline. Inspected all plumbing fixtures throughout home including previously installed Toto Drake elongated toilets in both bathrooms, verified proper operation and seating alignment on all units. Tested all faucet assemblies including chrome two-handle bathroom sink fixtures, confirmed proper water flow and shutoff valve functionality. Evaluated drain systems and verified no leaks or operational concerns present at any fixture locations. All plumbing components found to be functioning properly with no immediate repairs required at time of inspection.

Completed spring maintenance on 4-year-old residential HVAC system located in attic. Performed comprehensive inspection with particular attention to electrical components and amp draws following recent breaker failure incident from five days prior. Tested contactor operation and verified all electrical connections at terminal blocks were secure and properly torqued. Measured and recorded compressor amperage using clamp meter, confirming readings within manufacturer specifications at 4.59 amps with system operating normally. Inspected dual-run capacitor rated at 45/5 MFD for proper operation and physical condition—no signs of bulging, leaking, or degradation noted. Verified all refrigerant line connections were secure with no signs of oil residue or leaks. Tested system startup and shutdown cycles multiple times to ensure reliable operation of all components including contactor, capacitor, and compressor following the recent electrical issue. System operating efficiently with no abnorma