Round Rock HVAC, Plumbing, and Electrical Services
When you need reliable home service professionals in Round Rock, TX, SALT Service Co. has one team covering it all. Family-owned and serving Central Texas since 1984, SALT gives back locally through SALTcares. From urgent AC repairs and scheduled plumbing installations to electrical panel upgrades and standby generator setups, our licensed technicians handle every system in your home under one roof.
We offer flat-rate pricing on every job, with guaranteed craftsmanship backed by more than 5,200 Google reviews and a 4.9-star rating.
Call our local office at (512) 956-7842 to speak with our dispatch team, or schedule your appointment online.
Emergency Home Services in Round Rock
Most home emergencies in Round Rock fall into three categories: complete cooling loss during extreme summer heat, active plumbing leaks, and electrical power loss or burning smells.
For active leaks, shut off the main water valve. In Round Rock slab-on-grade homes, this valve is usually in a green ground box near the street curb or in a garage access panel on newer builds. A meter key at the street curb works as a backup.
If you notice electrical sparking or a burning smell, shut off the breaker at your main panel immediately. For an icing or hissing air conditioner, turn the system off at the thermostat to prevent compressor damage.
SALT Service Co. provides 24/7 emergency response with same-day scheduling when available. We charge no extra fees for after-hours or holiday calls. Regular system maintenance prevents these unexpected breakdowns before they happen.
Round Rock HVAC, Plumbing, and Electrical Services
Managing multiple home service contractors often leads to scheduling gaps and finger-pointing when major systems fail. SALT eliminates this friction by sending one accountable team of licensed technicians to service your property’s water, power, and climate systems on a single, coordinated schedule.
Professional electrical panel upgrades and installations
Authorized Generac whole-home generators and generator installation
Local conditions require specialized trade solutions. Round Rock municipal water contains very high mineral levels, and this hard water rapidly drives scale buildup in water heaters and fixtures. Standby generators are multi-trade projects that touch both gas and electrical lines, requiring rigorous permitting and inspections in Williamson County.
We set clear, flat-rate pricing before any work begins. Our licensed technicians perform a thorough system diagnosis, explain their findings in plain language, and share video summaries of any issues so you see exactly what needs attention. Every repair and installation is backed by our lifetime guarantee.
We also offer flexible financing options, including 0% interest for up to 18 months on qualifying work, so your home upgrades stay stress-free.
Protect Your Home with the SALT+ Membership
For ongoing protection, many Round Rock homeowners choose our SALT+ membership. For $24.95 a month, this plan provides essential maintenance designed to combat Round Rock’s hard water and heavy summer cooling demands:
Bi-annual HVAC tune-ups
Annual plumbing inspection and water heater flush
Yearly electrical safety inspection
Priority scheduling and 10% discount on repairs
This proactive care keeps your home running efficiently and prevents expensive emergency breakdowns. SALT+ members also receive a lifetime guarantee on covered repairs and installations.
Family-Owned, Independent and Giving Back
SALT has served Central Texas since 1984 and is family-owned and operated, built on “SALT of the Earth” service and Christian values. The Austin Business Journal named SALT a 2023 Best Places to Work. Through SALTcares, we give back close to home: each September, SALT matches up to $10,000 in donations to the Coalition to Cure Calpain 3, and our senior water heater giveaway provides a free water heater and installation to a local senior. Because SALT stays privately owned, those dollars stay in Central Texas.
Frequently Asked Questions About Round Rock Home Services
Do you offer 24/7 emergency plumbing, electrical, and AC repair in Round Rock?
Yes. SALT provides 24/7 emergency repairs in Round Rock for critical issues: active water leaks, hazardous electrical faults, and complete AC failure during extreme heat. If you have a major water leak, locate your main shutoff valve in the yard or garage and close it immediately. For sparking wires, shut off the main circuit breaker before calling. Our team responds quickly to secure your home.
How does upfront pricing work, and will I know the total before repairs begin?
We use flat-rate pricing so you know the exact cost before any work begins. Once our technician diagnoses the issue, they present your repair options and get your approval on the final price. That quoted price does not change, though complex factors like access limitations or code compliance may affect the initial diagnostic options we offer.
Is Round Rock water really that hard, and what problems does it cause?
Round Rock municipal water is exceptionally hard due to high calcium and magnesium levels from local limestone sources. This mineral content causes rapid scale buildup on fixtures and inside appliances, which degrades water heater efficiency and shortens its lifespan. We recommend an annual water heater flush or a dedicated water filtration system to prevent this mineral damage.
Do I need a permit for a whole-home standby generator in Round Rock?
Yes. Installing a standby generator requires local municipal permits because the system integrates with your electrical panel and gas lines. City codes require professional permitting and safety inspections to confirm proper placement and prevent hazardous electrical backfeed. SALT handles the entire permitting process so you do not have to.
When is it smarter to replace an AC system instead of repairing it?
Replacement is usually the smarter choice if your AC is over ten years old and the repair cost exceeds half the system’s value. Simple parts like capacitors or contactors are fast and inexpensive to replace. A failed compressor or leaking coil, though, often makes upgrading to a new system the better investment. Modern high-efficiency systems lower your monthly energy bills and come with comprehensive warranty coverage.
What electrical work do you handle? Do you do panels?
SALT Service Co. handles all residential electrical installations, repairs, and safety upgrades. We specialize in electrical panel upgrades, which resolve overloaded breakers, support standby generator integration, and keep your home safe. Visit our electrical services page for our full range of diagnostic and wiring solutions.
Same Day Service
Locally Owned
Licensed & Trained
Schedule Your Round Rock Home Service
Round Rock homeowners deserve one team they can count on for HVAC, plumbing, and electrical work. SALT Service Co. delivers that with flat-rate pricing, 24/7 availability, and a lifetime guarantee on every job. Call (512) 956-7842 or schedule online today.
When You See Our Trucks Driving In Round Rock, Give Us A Wave! Hook'em!
SALT Plumbing, Air & Electric Voted Austin’s #1 Electrician
Austin Shop Information
- Monday - Friday: 7am - 8pm
- Saturday & Sunday: 8am - 8pm
- 901 S MoPac Expy, Austin, Tx 78746
- (512) 956-7842
Round Rock, TX at a glance
SALT Service Co. has completed 6 jobs in Round Rock, TX on October 22, 2026.
SALT Service Co. has completed 1,770 jobs in Round Rock, TX in the last 12 months.
See Us in Action
Performed a maintenance inspection on two ground-floor closet-mounted HVAC systems and measured supply air temperature at the register with a pocket thermometer, recording 77.1°F, which indicates inadequate cooling output. Visual inspection of the air handler cabinet revealed heavy mineral and scale buildup, corrosion, and rust staining on the interior surfaces, along with dust and grime accumulation on the supply grille slats. Findings are consistent with a possible coil, drainage, or moisture issue and warrant further diagnostic evaluation and repair recommendations.
Performed a member maintenance visit on a single attic-installed split system (2018), including electrical diagnostics at the outdoor condenser using a true RMS clamp meter to verify voltage and amperage draw. Inspected condenser wiring, fan guard, and control connections, and confirmed no visible damage, rust, or frost. System was left operating within normal parameters.
Performed seasonal preventative maintenance on the attic-mounted air handler system, including inspection of the foil-faced insulated supply plenum, flexible duct connections, and sealed seams. Inspected the blower assembly and motor, confirming secure rubber-isolated mounts and intact electrical connections, and noted light dust accumulation on the blower housing. Verified overall system condition and cleared area of loose insulation debris to maintain safe, accessible equipment access.
Performed a whole-home electrical inspection and tune-up on the home's two breaker boxes. Removed the panel cover and visually inspected the load center, including the main lug terminations, neutral and ground connections, bus bars, and branch circuit breakers, with no evidence of damage, rust, corrosion, or overheating observed. Also checked ceiling-mounted fixtures, including the smoke detector and ceiling fan, with no visible deficiencies noted, establishing a baseline electrical condition record for the system.
Performed scheduled maintenance on an air-cooled standby generator with an Evolution 2.0 controller, including inspection of the air filter and replacement of the spark plugs. The air filter was found clean and intact, the unit showed no signs of rust, cracking, or frost damage, and the filter was dated for future service tracking. Customer reported the battery requires replacement.
Inspected the bathroom lavatory and found the original 35–40-year-old faucet assembly with a clogged filter/aerator that rendered it inoperable, with one widespread handle removed and the brass valve stem exposed. Accessed the vanity cabinet to verify the braided supply lines, angle stop valves, and pop-up drain assembly, finding no signs of leaks, corrosion, or cracking. Removed the clogged filter and completed the replacement to restore proper flow and function to the fixture.