Round Rock HVAC, Plumbing, and Electrical Services
When you need reliable home service professionals in Round Rock, TX, SALT Service Co. has one team covering it all. Family-owned and serving Central Texas since 1984, SALT gives back locally through SALTcares. From urgent AC repairs and scheduled plumbing installations to electrical panel upgrades and standby generator setups, our licensed technicians handle every system in your home under one roof.
We offer flat-rate pricing on every job, with guaranteed craftsmanship backed by more than 5,200 Google reviews and a 4.9-star rating.
Call our local office at (512) 956-7842 to speak with our dispatch team, or schedule your appointment online.
Emergency Home Services in Round Rock
Most home emergencies in Round Rock fall into three categories: complete cooling loss during extreme summer heat, active plumbing leaks, and electrical power loss or burning smells.
For active leaks, shut off the main water valve. In Round Rock slab-on-grade homes, this valve is usually in a green ground box near the street curb or in a garage access panel on newer builds. A meter key at the street curb works as a backup.
If you notice electrical sparking or a burning smell, shut off the breaker at your main panel immediately. For an icing or hissing air conditioner, turn the system off at the thermostat to prevent compressor damage.
SALT Service Co. provides 24/7 emergency response with same-day scheduling when available. We charge no extra fees for after-hours or holiday calls. Regular system maintenance prevents these unexpected breakdowns before they happen.
Round Rock HVAC, Plumbing, and Electrical Services
Managing multiple home service contractors often leads to scheduling gaps and finger-pointing when major systems fail. SALT eliminates this friction by sending one accountable team of licensed technicians to service your property’s water, power, and climate systems on a single, coordinated schedule.
Professional electrical panel upgrades and installations
Authorized Generac whole-home generators and generator installation
Local conditions require specialized trade solutions. Round Rock municipal water contains very high mineral levels, and this hard water rapidly drives scale buildup in water heaters and fixtures. Standby generators are multi-trade projects that touch both gas and electrical lines, requiring rigorous permitting and inspections in Williamson County.
We set clear, flat-rate pricing before any work begins. Our licensed technicians perform a thorough system diagnosis, explain their findings in plain language, and share video summaries of any issues so you see exactly what needs attention. Every repair and installation is backed by our lifetime guarantee.
We also offer flexible financing options, including 0% interest for up to 18 months on qualifying work, so your home upgrades stay stress-free.
Protect Your Home with the SALT+ Membership
For ongoing protection, many Round Rock homeowners choose our SALT+ membership. For $24.95 a month, this plan provides essential maintenance designed to combat Round Rock’s hard water and heavy summer cooling demands:
Bi-annual HVAC tune-ups
Annual plumbing inspection and water heater flush
Yearly electrical safety inspection
Priority scheduling and 10% discount on repairs
This proactive care keeps your home running efficiently and prevents expensive emergency breakdowns. SALT+ members also receive a lifetime guarantee on covered repairs and installations.
Family-Owned, Independent and Giving Back
SALT has served Central Texas since 1984 and is family-owned and operated, built on “SALT of the Earth” service and Christian values. The Austin Business Journal named SALT a 2023 Best Places to Work. Through SALTcares, we give back close to home: each September, SALT matches up to $10,000 in donations to the Coalition to Cure Calpain 3, and our senior water heater giveaway provides a free water heater and installation to a local senior. Because SALT stays privately owned, those dollars stay in Central Texas.
Frequently Asked Questions About Round Rock Home Services
Do you offer 24/7 emergency plumbing, electrical, and AC repair in Round Rock?
Yes. SALT provides 24/7 emergency repairs in Round Rock for critical issues: active water leaks, hazardous electrical faults, and complete AC failure during extreme heat. If you have a major water leak, locate your main shutoff valve in the yard or garage and close it immediately. For sparking wires, shut off the main circuit breaker before calling. Our team responds quickly to secure your home.
How does upfront pricing work, and will I know the total before repairs begin?
We use flat-rate pricing so you know the exact cost before any work begins. Once our technician diagnoses the issue, they present your repair options and get your approval on the final price. That quoted price does not change, though complex factors like access limitations or code compliance may affect the initial diagnostic options we offer.
Is Round Rock water really that hard, and what problems does it cause?
Round Rock municipal water is exceptionally hard due to high calcium and magnesium levels from local limestone sources. This mineral content causes rapid scale buildup on fixtures and inside appliances, which degrades water heater efficiency and shortens its lifespan. We recommend an annual water heater flush or a dedicated water filtration system to prevent this mineral damage.
Do I need a permit for a whole-home standby generator in Round Rock?
Yes. Installing a standby generator requires local municipal permits because the system integrates with your electrical panel and gas lines. City codes require professional permitting and safety inspections to confirm proper placement and prevent hazardous electrical backfeed. SALT handles the entire permitting process so you do not have to.
When is it smarter to replace an AC system instead of repairing it?
Replacement is usually the smarter choice if your AC is over ten years old and the repair cost exceeds half the system’s value. Simple parts like capacitors or contactors are fast and inexpensive to replace. A failed compressor or leaking coil, though, often makes upgrading to a new system the better investment. Modern high-efficiency systems lower your monthly energy bills and come with comprehensive warranty coverage.
What electrical work do you handle? Do you do panels?
SALT Service Co. handles all residential electrical installations, repairs, and safety upgrades. We specialize in electrical panel upgrades, which resolve overloaded breakers, support standby generator integration, and keep your home safe. Visit our electrical services page for our full range of diagnostic and wiring solutions.
Same Day Service
Locally Owned
Licensed & Trained
Schedule Your Round Rock Home Service
Round Rock homeowners deserve one team they can count on for HVAC, plumbing, and electrical work. SALT Service Co. delivers that with flat-rate pricing, 24/7 availability, and a lifetime guarantee on every job. Call (512) 956-7842 or schedule online today.
When You See Our Trucks Driving In Round Rock, Give Us A Wave! Hook'em!
SALT Plumbing, Air & Electric Voted Austin’s #1 Electrician
Austin Shop Information
- Monday - Friday: 7am - 8pm
- Saturday & Sunday: 8am - 8pm
- 901 S MoPac Expy, Austin, Tx 78746
- (512) 956-7842
Round Rock, TX at a glance
SALT Service Co. has completed 6 jobs in Round Rock, TX on October 15, 2026.
SALT Service Co. has completed 1,770 jobs in Round Rock, TX in the last 12 months.
See Us in Action
Inspected the exterior electrical service equipment and main panel, including breaker positions, labeling, and conduit/wiring condition, to troubleshoot the garage-area light fixture that remained inoperative after a lamp replacement. Verified the fixture's circuit and associated breaker, and evaluated the previously installed motion-sensor garage switch and shared circuit for faults or loss of power. Equipment appeared intact, with no visible corrosion, damage, or loose wiring at the panel or conduit runs.
Performed a seasonal tune-up on a 14-year-old R-410A split system, with the outdoor condensing unit serviced and inspected. The condenser control compartment was found heavily contaminated with cobwebs and dust, with corrosion at the wire knockout; the contactor and low-voltage wiring were cleaned and inspected, and the cabinet, louvers, and coil surfaces were also noted to be dirty and stained. Recommended clearing the stored firewood and debris from around the condenser to restore proper airflow and service clearance.
Responded to a no-cooling/unable-to-maintain-temperature complaint on a dual-system residential installation with attic air handlers. Connected a digital manifold gauge set to the outdoor condenser and set up a nitrogen cylinder with regulator to pressure-test and evaluate the refrigerant circuit for leaks and proper charge. Condenser exteriors showed no frost, ice, rust, or visible damage, only light dust and debris around the base.
Responded to a no-cooling complaint on a 3-year-old split system. Verified thermostat operation in cool mode, then inspected the outdoor condenser unit, which showed no visible frost, corrosion, or physical damage. Given the system's history of recurring refrigerant loss, evaluated system performance and refrigerant charge for a possible leak, and recommended leak detection and further diagnostics to determine the root cause.
Performed fall maintenance inspection on a 4-ton York heat pump system with zoning, verifying thermostat operation in cool mode and confirming the outdoor condenser is properly mounted on its pad with a secure disconnect, intact line set insulation, and no signs of frost, rust, or damage. The attic air handler was clean and accessible, and the system was operating normally with no deficiencies noted. Damper balancing may be revisited if the customer continues to experience uneven temperatures between zones.
Performed a routine maintenance inspection on a one-year-old York dual fuel system installed in the attic. Inspected the furnace cabinet, gas valve assembly, wiring harness, flue pipe, gas line, refrigerant lines, condensate drain connections, and ductwork, and verified electrical readings with a clamp meter. All components appeared intact with no visible damage, leaks, or corrosion, and the system was left in proper operating condition.