Round Rock HVAC, Plumbing, and Electrical Services

Responded to generator displaying error codes 1501 and 1902 following power outage, along with battery maintenance alert indicating overdue service. Performed comprehensive diagnostic evaluation of standby generator system located on side of residence. Inspected control panel assembly, internal wiring connections, and electrical components mounted within enclosure. Examined terminal blocks, relay assemblies, and power supply unit for proper operation and secure connections. Assessed battery condition and found Duracell unit showing signs of age and requiring maintenance attention per manufacturer specifications. Verified all cable connections at positive and negative terminals were secure. Cleared fault codes from controller after determining root cause related to power interruption and battery condition. Performed standard maintenance procedures including battery service to address maintenance alert. Tested generator system operation to confirm proper functionality and successful erro

Performed smoke test on plumbing system at 30-year-old residential property to identify potential leaks or breaches in drain, waste, and vent lines. Introduced non-toxic smoke into the DWV system and monitored for smoke egress at fixtures, roof penetrations, and outdoor cleanouts. Inspected all accessible drain lines, P-traps, and vent stack connections for proper sealing and integrity. System held smoke pressure appropriately with no visible leaks detected at interior fixtures or exterior vent terminations.

Completed comprehensive electrical maintenance inspection on 2,914 square foot residential property with two breaker panels located in exterior/garage areas. Performed thorough examination of both electrical panels, including visual inspection of all circuit breakers, bus bar assemblies, wire terminations, and interior panel components for signs of wear, overheating, loose connections, or code violations. Inspected exterior electrical equipment and conduit runs, verifying proper grounding, weatherproofing, and physical protection of exposed wiring. Evaluated all accessible electrical connections throughout the home, tested GFCI outlets for proper function, and verified circuit breaker operation. Documented panel conditions with photographs showing bus bar configuration, breaker arrangement, and overall system integrity. All components found operating within normal parameters with no immediate safety concerns identified. This represents the first scheduled electrical maintenance visit s

# HVAC Drain Line Repair and Reconnection Responded to service call for disconnected HVAC condensate drain line causing active water leakage at exterior unit location. Upon arrival, found the primary drain line completely disconnected from the air handler drain pan outlet, resulting in continuous water discharge directly onto the ground and concrete pad beneath the equipment. The 3-year-old HVAC system had been operating without proper drainage, causing significant water accumulation and concrete surface deterioration in the service area. Inspected the drain line routing and identified that the flexible PVC drain tubing had become detached from the drain pan connection point. Assessed the extent of water damage to surrounding surfaces, noting substantial discoloration, surface pitting, and structural deterioration of the concrete pad where water had been pooling. Documented the condition of all components and the affected areas with photographic evidence showing the disconnected drai

Responded to no cooling call on residential air conditioning system. Upon arrival, performed diagnostic testing on outdoor condensing unit using digital manifold gauge set to check refrigerant pressures and system operation. Inspection revealed compressor operational but noted significant rust and corrosion on condensate drain pan, indicating age-related deterioration of unit components consistent with 26-year-old home. System evaluated and findings documented with photos for customer review and future service recommendations.

Completed comprehensive plumbing maintenance visit addressing multiple concerns throughout the residence. Tightened loose kitchen faucet to restore proper fixture stability. Investigated low water pressure complaint in bathroom, inspecting supply lines and angle stop valves beneath vanity for potential restriction or partial closure issues. Performed complete flush and drain service on 2-year-old Rheem gas water heater located in upstairs utility closet to remove sediment buildup and maintain optimal heating efficiency and tank longevity.